Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

B–QLogic Fabric Manager Log Messages
Other Log Messages
createMCastGroups: vFabric VF0013 Multicast Group failure, multicast GID not
configured
SM Area: Administrator.
Meaning: Attempt to pre-create mcast group failed due to configuration error.
The default MGID is not configured.
Action: Configuration change required if pre-create is required.
sa_PathRecord: requested source Guid/Lid not found/active in current topology
SM Area: Administrator.
Meaning: May be caused by simultaneous removal/insertion events in the
fabric.
Action: Check the health of the requester and the connected port if the
message persist.
sa_PathRecord: requested destination GUID not an active port nor a Multicast Group
SM Area: Administrator.
Meaning: May be caused by simultaneous removal/insertion events in the
fabric or the destination has dropped from fabric.
Action: None.
sa_XXXXXXXX: Can not find source lid of 0x0001 in topology in request to
subscribe/unsubscribe…
SM Area: Administrator.
Meaning: May be caused by simultaneous removal/insertion events in the
fabric or request received from the node that the SM has dropped
from the fabric due to non-response to SMA queries.
Action: Check health of the node at lid 0x0001 if the fabric is stable.
sa_XXXXXXXX: requested source Lid/GUID not found/active in current topology
SM Area: Administrator.
Meaning: May be caused by simultaneous removal/insertion events in the
fabric or request received from the node that the SM has dropped
from the fabric due to non-response to SMA queries.
Action: Check the health of node at lid 0x0001 if the fabric is stable.
sa_McMemberRecord_Set: Port GID in request (0xFE80000000000000:00066a00d9000143)
from Hca1, Port 0x00066a00d9000143, LID 0x0001, for group
IB0054608-01 B B-13