Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

B–QLogic Fabric Manager Log Messages
QLogic Fabric Manager Event Messages
1. Redundancy Lost
2. Redundancy Restored
3. Appearance in Fabric
4. Disappearance from Fabric
5. SM State Change to Master
6. SM State Change to Standby
7. SM Shutdown
8. Fabric Initialization Error
9. Link Integrity Error
10. Security Error
11. Other Exception
12. Fabric Summary
13. SM State Change to Inactive
• , , and are the InfiniBand node
description, port number and node GUID of the port and node that are
primarily responsible for the event. Any pipes ( | ) or colons ( : ) in the node
description will be converted to spaces in the log message.
• , and are optional fields
describing the other end of the link. These fields and the 'LINKEDTO'
keyword will only be shown in applicable messages. Any pipes ( | ) or colons
(:) in the node description will be converted to spaces in the log message.
• is an optional free-form field detailing additional information useful
in diagnosing the log message cause.
An example of such an event message would be (line wrapped to show separate
fields):
Oct 10 13:14:37 slot 101:172.21.1.9; MSG:ERROR|
SM:SilverStorm 9040 GUID=0x00066a00db000007 Spine 101, Chip A:port 0|
COND:#9 Link Integrity Error|
NODE:SilverStorm 9040 GUID=0x00066a00db000007 Spine 101, Chip A:port
10:0x00066a00db000007|
LINKEDTO:9024 DDR GUID=0x00066a00d90001db:port 15:0x00066a00d90001db|
DETAIL:Excessive Buffer Overrun threshold trap received.
QLogic Fabric Manager Events
#1 Redundancy Lost
Severity:
Warning
B-2 IB0054608-01 B