Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

A–Fabric Manager Command Line Interface
smLooptestStop
STOP the loop test (puts switch LFTs back to normal).
smLooptestInjectPackets numPkts
Enter numPkts to send to all switch loops (default=1).
smLooptestInjectAtNode SwNodeIndex
Enter the switch node index to inject loop packets (default=0).
smLooptestInjectEachSweep
1 to inject packets each sweep, 0 to stop injecting each sweep.
smLooptestPathLength pathlength
Sets the loop path length 2-4 (default=3.)
smLooptestMinISLRedundancy number of loops
Sets the minimum number of loops in which to include each ISL (default=4).
smLooptestShowLoopPaths node index | all
Displays the loop paths given node index or all loop paths (default=all).
smLooptestShowSwitchLft node index | all
Displays a switch LFT given node index or all switches LFTs (default=all).
smLooptestShowTopology
Displays the topology for the SM Loop Test.
smLooptestShowConfig
Displays the current active loop configuration.
smForceRebalance
Toggle Force Rebalance setting for SM.
smBroadcastConfig
Broadcast the XML configuration file to STANDBY and INACTIVE SM's.
Examples
-> fm_cmd –i 2 smForceSweep
IB0054608-01 B A-11