Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

A–Fabric Manager Command Line Interface
smLogMode logmode
Set the SM log mode flags (0/1 1=downgrade non-actionable, 0/2 2=logfile only).
smLogMask subsystem mask
Set the SM log mask for a specific subsystem to the value given; see “Shared
Parameters” on page 3-6 for a list of subsystems and mask bit meanings.
smPerfDebug
Toggle performance debug output for SM.
saPerfDebug
Toggle performance debug output for SA.
saRmppDebug
Toggle Rmpp debug output for SA.
bmForceSweep
Make the BM sweep now.
bmRestorePriority
No longer supported, use “smRestorePriority” on page A-8.
bmLogLevel loglevel
Set the BM logging level (1=WARN+, 2=INFINI_INFO+, 3=INFO+,
4=VERBOSE+, 5=DEBUG2+, 6=DEBUG3+, 7=TRACE+).
bmLogMode logmode
Set the BM log mode flags (0/1 1=downgrade non-actionable, 0/2 2=logfile only).
bmLogMask subsystem mask
Set the BM log mask for a specific subsystem to the value given; see “Shared
Parameters” on page 3-6 for a list of subsystems and mask bit meanings.
bmDebug
Toggle debug output for BM.
bmRmppDebug
Toggle Rmpp debug output for BM.
pmRestorePriority
No longer supported, use “smRestorePriority” on page A-8.
pmLogLevel
No longer supported, use “smLogLevel loglevel” on page A-8.
IB0054608-01 B A-9