Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

A–Fabric Manager Command Line Interface
config_generate
Interactively generates a QLogic Fabric Manager XML configuration file.
Syntax
Path:
config_generate [-e] dest_file
/opt/qlogic_fm/etc/
Keywords -e
Generate file for embedded FM (For example, don’t prompt for features not
applicable to embedded such as multiple FM instances). Default is to generate a
file for host FM.
dest_file
Name of file to generate.
Notes
Examples
This command presently allows interactive selection of the following FM
configuration parameters:
• SubnetSize
• LMC (multi-LID control)
• AdaptiveRouting (Enable, LostRouteOnly, Tier1FatTree)
• LogMode
• NodeAppearanceMsgThreshold
• Which FM instances should be enabled
• Name for each FM Instance
• IPoIB MulticastGroup Rate and MTU for each FM instance
• FM primary or secondary status for failover for each FM instance
• sticky failover
• SubnetPrefix for each FM instance
• Performance Manager
Sweep Interval
Logging Thresholds
Number of PM/PA clients
Number of historical images to retain
When using an embedded FM, this command is also available on hosts with
FastFabric installed in the /opt/iba/fm_tools directory.
config_generate my_fm_config.xml
A-6 IB0054608-01 B