Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

5–Embedded Fabric Manager Commands and Configuration
Subnet Management Group CLI Commands
smLooptestShowSwitchLft
This command shows the Lid Forwarding Table for all switches or a specific switch
in the fabric.
The “smLooptestShowSwitchLft” command appears to be a unique display of a
switches (or just an individual switch) LFT. Therefore it appears to provide
important LFT information with the Loop Test grouping in the CLI help menu. It
can be removed easily if it is deemed necessary since there are other commands
to get this information
Syntax
Keywords
Notes
Examples
smLooptestShowSwitchLft[node index]
node index
The node index of the switch in which to print switch LFT.
Use this command to print switch LFT specified by switch index, or all switches
(default) for the SM Loop Test test.
-> smLooptestShowSwitchLft
Node[0000] LID=0x0001 GUID=0x00066a00d8000118 [i9k118]
Linear Forwarding Table
LID PORT
------ ----
0x0001 0000
0x0002 0009
0x0003 0016
--------------
IB0054608-01 B 5-75