Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

5–Embedded Fabric Manager Commands and Configuration
Subnet Management Group CLI Commands
smLooptestInjectEachSweep
Injects packets on each sweep for the SM Loop Test
Syntax
Keywords
Notes
smLooptestInjectEachSweep[inject/not inject]
inject/not inject
Inject (1) or do not Inject (0) packets on each sweep for the SM Loop Test. Valid
values are 1 or 0.
Use this command to inject (1) or not inject (0) packets on each sweep for the SM
Loop Test.
Examples > smLooptestInjectEachSweep 1
sm_looptest_inject_packets_each_sweep: loop test will inject
packets every sweep, numPackets=5
The SM Loop Test will inject packets every sweep
IB0054608-01 B 5-71