Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

5–Embedded Fabric Manager Commands and Configuration
Subnet Management Group CLI Commands
smLooptestFastModeStart
Starts the SM Loop Test in fast mode. Either accepts a single argument of
“number of packets” or no arguments which will default to 4 packets. Command
will start SM if it is not running.
Syntax
Keywords
Notes
smLooptestFastModeStart [packets]
packets
The number of 256 byte packets used when starting the SM Loop Test. Valid
values are 0-10.
Use this command to start the SM Loop Test in Fast Mode with the specified
number of 256 byte packets. Valid values for number of packets are 0-10
(default=4). If the number of packets is 0, then no packets will be injected. If SM
has not been previously started this command will start SM. Note that Loop Test
will only function if the SM is in the Master state.
Examples > smLooptestFastModeStart 5
Waiting for SM to complete startup.......................done
The SM Loop Test is being started
IB0054608-01 B 5-67