Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

5–Embedded Fabric Manager Commands and Configuration
Subnet Management Group CLI Commands
smVLStall
Syntax
Keywords
Notes
Display/Dynamically set the VL stall value of the SM.
smVLStall [packets]
packets
The number of sequential packets dropped before port enters VL stalled state.
Use this command to display or dynamically set the VL stall value for ports in the
fabric. This value determines the how quickly a virtual lane for a particular switch
or endport enters a 'stalled' state after dropping packets.
The Subnet manager must be running to use this command. Changes made with
this command will only affect the currently running SM, and will be forgotten if the
FM is restarted or the chassis is rebooted. To make persistent changes edit the
FM XML configuration file.
Examples -> smVLStall 5
SM VL Stall Threshhold: 5 packets
IB0054608-01 B 5-39