Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

5–Embedded Fabric Manager Commands and Configuration
Subnet Management Group CLI Commands
smHoqLife
Display/Dynamically set the head of queue packet lifetime for switch ports.
Syntax
Keywords
Notes
smHoqLife [lifetime]
lifetime
The packet lifetime value between 0 and 31, inclusive.
Use this command to display or set the maximum lifetime that a packet may
remain at the head of virtual lane's transmission queue before it is discarded by a
switch, calculated using the formula: 4.096 * (2 to the power of Hoqlifetime)
microseconds.
The Subnet manager must be running to use this command. Changes made with
this command will only affect the currently running SM, and will be forgotten if the
FM is restarted or the chassis is rebooted. To make persistent changes edit the
FM XML configuration file.
Examples -> smHoqLife 9
SM HOQ Liftime: 9 (~2097 microseconds)
5-38 IB0054608-01 B