Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

5–Embedded Fabric Manager Commands and Configuration
Subnet Management Group CLI Commands
smSweepRate
Display/Dynamically set the sweep rate of the subnet manager.
Syntax
Keywords
Notes
smSweepRate [sweepRate]
sweepRate
The sweep rate (in seconds) of the subnet manager. Valid values are 3-86400, or
0 to turn the sweep off. The sweepRate is the interval between the end of one
sweep and the start of the next sweep.
The sweep rate determines how often the subnet manager scans the fabric for
changes and events.
The Subnet manager must be running to use this command. Changes made with
this command will only affect the currently running SM, and will be forgotten if the
FM is restarted or the chassis is rebooted. To make persistent changes edit the
FM XML configuration file.
Examples -> smSweepRate 200
The SM sweep rate has been dynamically set to 200 seconds
for the currently runing SM. To make a persistent change,
the xml config file must be modified and activated.
IB0054608-01 B 5-35