Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

5–Embedded Fabric Manager Commands and Configuration
Subnet Management Group CLI Commands
bmPriority
Display the priority of the embedded baseboard manager.
Syntax
Keywords
Notes
Examples
bmPriority
None.
The priority of the Baseboard Manager (BM) determines which BM will become
the master BM for the fabric. Zero is the lowest priority and fifteen is the highest.
The BM with the highest priority will become the master BM for the fabric. The
elevated priority value determines what the priority of the BM will be if it becomes
Master. This allows persistent failovers that do not automatically fail back by
configuring the elevated priority to be higher than all normal priorities. This feature
is effectively disabled when set to the default of zero.Subnet manager must be
running to display the priority.
-> bmPriority
The BM Priority is 0
The BM Elevated Priority is disabled
IB0054608-01 B 5-33