Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

5–Embedded Fabric Manager Commands and Configuration
Subnet Management Group CLI Commands
smShowRemovedPorts
Display ports that have been automatically removed from the fabric.
Syntax
Keywords
Notes
Examples
smShowRemovedPorts
None.
This displays ports that have been removed from the fabric automatically by the
SM, such as when a 1x link mode is set to 'ignore' or when a port has exceeded its
urgent trap threshold. This command states that the SM is in the STANDBY mode
if the SM is not in the MASTER mode.
-> smShowRemovedPorts
Disabled Ports:
IB0054608-01 B 5-23