Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

5–Embedded Fabric Manager Commands and Configuration
Subnet Management Group CLI Commands
smShowLidMap
Display the LID-to-port GUID map for the subnet manager.
Syntax
Keywords
Notes
smShowLidMap
None
Use this command to display the LID-to-port GUID map of the subnet manager.
The pass count for a LID is incremented each time the SM sweep detects that
LID.
If LMC has been used to assign multiple LIDs to a node, those assignments will
be reflected in the smShowLidMap output. This command states that the SM is in
the STANDBY mode if the SM is not in MASTER mode.
Similar information can also be obtained using the FastFabric commands:
iba_saquery or iba_report -o lids
Examples
-> smShowLidMap
------------------------------------------------------------------
----------------
SM is currently in the MASTER state, with Topology Pass count = 341
------------------------------------------------------------------
----------------
Lid 0x0001: guid = 0x00066a000600013c, pass = 341, SilverStorm
9080 GUID=0x00066a00da000100 172.26.2.2 Spine 1, Ch
Lid 0x0002: guid = 0x00066a0007000170, pass = 341, SilverStorm
9080 GUID=0x00066a00da000100 172.26.2.2 Leaf 4, Chi
Lid 0x0003: guid = 0x00066a100600013c, pass = 341, SilverStorm
9080 GUID=0x00066a00da000100 172.26.2.2 Spine 1, Ch
Lid 0x0004: guid = 0x00066a11dd00004a, pass = 341, FVIC in Chassis
0x00066a00da000100, Slot 7
Lid 0x0005: guid = 0x00066a21dd00004a, pass = 341, FVIC in Chassis
0x00066a00da000100, Slot 7
Lid 0x0006: guid = 0x00066a00a0000248, pass = 229
Lid 0x0007: guid = 0x00066a01a0007116, pass = 341, st149
Lid 0x0008: guid = 0x0000000000000000, pass = 0
Lid 0x0027: guid = 0x00066a026000016c, pass = 341, VFx in Chassis
0x00066a0050000135, Slot 5
Lid 0x0028: guid = 0x0000000000000000, pass = 0
Lid 0x0029: guid = 0x00066a0260000174, pass = 341, VFx in Chassis
0x00066a000100024d, Slot 2
Lid 0x002a: guid = 0x0000000000000000, pass = 0
5-20 IB0054608-01 B