Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

5–Embedded Fabric Manager Commands and Configuration
Subnet Management Group CLI Commands
smShowServices
Display subnet administration service records of the subnet manager.
Syntax
Keywords
Notes
Examples
smShowServices
None.
The components (fields) of each service record are displayed. Each service
record is stored in a location identified by a 'Slot' number which is displayed
before any component of that Service Record. If a group of slots do not contain
Service Records, the first slot of the empty group is displayed as 'empty'. This
command states that the SM is in the STANDBY mode if the SM is not in
MASTER mode.
Similar information can also be obtained using the FastFabric command:
iba_saquery -o service
-> smShowServices
******************************************************************
There is 1 Service Records
*********************************************************
Service ID
= 0x1100D03C34834444
Service GID
= 0xFE80000000000000:00066A000600013C
Service P_Key = 0x0000
Service Lease = infinite
Service Key =
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00
Service Name = SilverStorm Fabric Executive service Rev 1.1
Service Data 8 =
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00
Service Data 16 =
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Service Data 32 =
0x0000 0x0000 0x0000 0x0000
Service Data 64 =
0x0000000000000000 0x0000000000000000
Service Expire Time = 0x0100000000000000
IB0054608-01 B 5-15