Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

5–Embedded Fabric Manager Commands and Configuration
Subnet Management Group CLI Commands
smShowGroups
Display multicast group information in the embedded subnet manager.
Syntax
smShowGroups [-h]
Keywords -h
Display the host name as part of the output.
Notes
Examples
Use this command to display multicast group information in the subnet manager.
This command is not available unless the SM is in MASTER mode.
Similar information can also be obtained using the FastFabric command:
iba_showmc
-> smShowGroups
Multicast Groups:
join state key: F=Full N=Non S=SendOnly Member
0xff12601bffff0000:00000001ffffd5bb (c001)
qKey = 0x00000000 pKey = 0xFFFF mtu = 4 rate = 3 life = 19 sl = 0
0x0011750000ffd5bb F
0xff12401bffff0000:00000000ffffffff (c000)
qKey = 0x00000000 pKey = 0xFFFF mtu = 4 rate = 3 life = 19 sl = 0
0x00066a01a0007116 F 0x0002c902003fffd5 F 0x00066a00a00001ac F
0x00066a01a000015d F 0x00066a00a00001a3 F 0x00066a00a00001dc F
0x00066a00a000035a F 0x0011750000ffd5c2 F 0x0011750000ffd664 F
0x0011750000ffd9c2 F 0x0011750000ffd9f8 F 0x0011750000ffd5b9 F
0x0011750000ffda4a F 0x0011750000ffd5bb F 0x0011750000ffd9de F
5-14 IB0054608-01 B