Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

More documents

Recommendations

Info

5–Embedded Fabric Manager Commands and Configuration Subnet Management Group CLI Commands smConfig Authority Syntax Keywords Configure startup parameters of the embedded subnet manager. smConfig [query] [startAtBoot yes|no] [startOnSlaveCmu yes|no] query Display present settings, no change. startAtBoot yes | no yes – Start the subnet manager at chassis boot. no – Do not start the subnet manager at chassis boot. startOnSlaveCmu yes | no yes – Start the subnet manager on the slave CMU. no – Do not start the subnet manager on the slave CMU. Notes Examples Use this command to configure the subnet manager. Changes to these parameters will not take effect until the next reboot of the Chassis Management Card(s). This command can only be run on the master Chassis Management Card. -> smconfig query startAtBoot: no startOnSlaveCmu: no -> -or- -> smConfig Start at boot [Y] Start on slave CMU [N] -> -or- -> smconfig startAtBoot yes startOnSlaveCmu yes Saving.... Saving complete... 5-4 IB0054608-01 B
5–Embedded Fabric Manager Commands and Configuration Subnet Management Group CLI Commands smPmBmStart Set/display whether the PM and BM will start with the SM. Syntax Keywords smPmBmStart [enable | disable | pm | bm | none] enable Enable the start of the PM and BM at SM start-up. disable Disable the start of the PM and BM at SM start-up. pm Enable start of PM and FE, and disable BM at SM start-up. bm Enable start of BM and FE, and disable PM at SM start-up. none Disable start of PM, BM, and FE at SM start-up. Notes Examples The configuration can only be changed from the master Chassis Management Card. -> smPmBmStart SM is enabled PM is enabled BM is enabled FE is enabled -> smPmBmStart disable SM is enabled PM is disabled BM is disabled FE is enabled IB0054608-01 B 5-5
Page 1 and 2:
User Guide Fabric Manager 7.0.1 IB0
Page 3 and 4:
Table of Contents Preface Intended
Page 5 and 6:
Fabric Manager 7.0.1 User Guide Fab
Page 7 and 8:
Fabric Manager 7.0.1 User Guide 4 V
Page 9 and 10:
Fabric Manager 7.0.1 User Guide D E
Page 11 and 12:
Preface Intended Audience This manu
Page 13 and 14:
For details about available service
Page 15 and 16:
1 Overview of the QLogic Fabric Man
Page 17 and 18:
1-Overview of the QLogic Fabric Man
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
2 Advanced Fabric Manager Capabilit
Page 31 and 32:
2-Advanced Fabric Manager Capabilit
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
3 Fabric Manager Configuration This
Page 73 and 74:
3-Fabric Manager Configuration Conf
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128: 3-Fabric Manager Configuration Conf
Page 145 and 146: 4 Virtual Fabrics Overview Virtual
Page 147 and 148: 4-Virtual Fabrics Configuration Eac
Page 149 and 150: 4-Virtual Fabrics Configuration Tab
Page 151 and 152: 4-Virtual Fabrics Configuration The
Page 153 and 154: 4-Virtual Fabrics Configuration 0
Page 155 and 156: 4-Virtual Fabrics Configuration All
Page 157 and 158: 4-Virtual Fabrics Configuration . T
Page 165 and 166: 4-Virtual Fabrics Configuration Sec
Page 167 and 168: 4-Virtual Fabrics Configuration Tab
Page 171 and 172: 4-Virtual Fabrics Configuration
Page 173 and 174: 4-Virtual Fabrics Configuration Al
Page 175 and 176: 5 Embedded Fabric Manager Commands
Page 177: 5-Embedded Fabric Manager Commands
Page 181 and 182: 5-Embedded Fabric Manager Commands
Page 229 and 230:
5-Embedded Fabric Manager Commands
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
6 Installation and Set Up Installin
Page 255 and 256:
6-Installation and Set Up Installin
Page 257 and 258:
6-Installation and Set Up Installin
Page 259 and 260:
A Fabric Manager Command Line Inter
Page 261 and 262:
A-Fabric Manager Command Line Inter
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
B QLogic Fabric Manager Log Message
Page 277 and 278:
B-QLogic Fabric Manager Log Message
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
C Mapping Old Parameters Versions o
Page 309 and 310:
C-Mapping Old Parameters Old SM Par
Page 311 and 312:
C-Mapping Old Parameters Old SM Par
Page 313 and 314:
C-Mapping Old Parameters Old PM Par
Page 315 and 316:
C-Mapping Old Parameters Old BM Par
Page 317 and 318:
D QOS Options in a Mesh/Torus vFabr
Page 319 and 320:
E ./INSTALL Syntax Syntax ./INSTALL
Page 322:
Corporate Headquarters QLogic Corpo
show all

Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

Create successful ePaper yourself

Delete template?

Save as template?