Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

4–Virtual Fabrics
Configuration
Table 4-3. VirtualFabric Parameters (Continued)
Parameter
SecondaryRouteOnly
BaseSL
Security
Members
LimitedMembers
Application
Description
When the dor-updown RoutingAlgorithm is in use, multiple
SLs are required for DOR functionality.
SecondaryRouteOnly can be enabled for a vFabric to
limit the number of SLs required for the vFabric to one.
When this is enabled, the vFabric members are limited
to using the secondary route.
For dor-updown, this is the updown route (which
requires only one SL) and that allows more QoS vFabrics
to be configured. This parameter is ignored if the
RoutingAlgorithm is configured as shortestpath.
The default is 0.
Allows a specific SL (0–15) to be used for the vFabric.
When dor-updown routing is used, additional SLs may
also be used for routing purposes.
SM selects value if unspecified.
When On (1), the Subnet Manager provides security
within this vFabric and between other vFabrics. LimitedMembers
cannot talk to each other in the vFabric.
When Off (0), the Subnet Manager is free to manage
routes and PKeys as it chooses, and there are no
guarantees. LimitedMembers can talk to each other
in the vFabric.
A DeviceGroup.Name that should be in the Virtual-
Fabric.
Can be specified more than once per VirtualFabric if
required.
A DeviceGroup.Name with limited membership in the
VirtualFabric. When Security is off, this is functionally
the same as a DeviceGroup specified using Members.
Can be specified more than once per VirtualFabric if
required.
An Application.Name that should be in the Virtual-
Fabric.
Can be specified more than once per VirtualFabric if
required.
IB0054608-01 B 4-23