Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

4–Virtual Fabrics
Configuration
Table 4-2. DeviceGroup Parameters (Continued)
Parameter
Description
Select
IncludeGroup
Special selection cases.
The following selection cases can be used as an easy
catch-all:
• All – All Devices
• Self – This FM instance's port
• AllSMs – All ports that report IsSM Capability Mask,
including self
• SWE0 – Every Switch Port 0 with Enhanced Port 0 in
Capability Mask. By definition also includes all Embedded
SMs and managed spines of QLogic Internally
Managed Switches.
The listed selection cases are case insensitive
By having multiple Select parameters, multiple selections
can be combined as required in the same Device-
Group section.
This will include all the devices in the given Device-
Group.
Loops (including the parent DeviceGroup) are not
allowed.
It is valid to have more than one specification match the
same device; in which case, the device is only included in
the DeviceGroup once.
There is a nesting limit of 32.
NOTE:
The SystemImageGUID, NodeGUID, PortGUID, and NodeDesc for
devices presently in the fabric can be identified by using iba_report or
iba_report -o comps. If required iba_report -x or
iba_report -o comps -x provides an XML output from which individual
NodeGUID, PortGUID, SystemImageGUID, or NodeDesc lines can be
cut/pasted into the required DeviceGroup sections.
4-14 IB0054608-01 B