Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

3–Fabric Manager Configuration
Configuring the QLogic Fabric Manager
Table 3-32. Additional Bm Parameters (Continued)
Parameter
Default
Value
Description
ConfigConsistencyCheck-
Level
ConfigConsistencyCheck-
Method
2 Controls the Configuration Consistency
Check for BM. If specified for an individual
instance of BM, will override Common.Shared
settings. Checking can be
completely disabled, or can be set to take
action by deactivating Secondary BM if
configuration does not - pass the consistency
check criteria.
• 0 = disable Configuration Consistency
Checking
• 1 = enable Configuration Consistency
Checking without taking action (only
log a message)
• 2= enable Configuration Consistency
Checking and take action (log message
and shutdown Secondary BM)
0 Controls the checksum generation
method for Configuration Consistency
Checking between redundant BMs. Will
override Common.Shared settings if
specified per instance. Checking MD5
cannot be used when a Host FM and
Embedded FM are being used as a
redundant pair. In which case the simple
additive checksum must be used. The
simple additive checksum mechanism
may fail to detect some configuration differences.
• 0 = use MD5 checksum method
• 1 = use simple additive checksum
method
Priority 0 0 to 15, higher wins.
ElevatedPriority
0 to 15, higher wins.
DefaultPKey 0xffff Overrides setting from Common.Shared
for BM
The PKey for BM. This should be the
Default PKey so they can manage all
nodes.
IB0054608-01 B 3-71