Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

3–Fabric Manager Configuration
Configuring the QLogic Fabric Manager
Bm Parameters
Bm Controls
The following tables describe parameters that can be used in the Pm subsection of
either the Common or Fm sections.
Any parameter that can be used in the Common.Shared section may also be
used in the Common.Bm or Fm.Bm sections.
The parameters shown in Table 3-31 may be used in the Bm subsection of either
the Common or Fm sections.
Table 3-31. Bm Parameters
Parameter
Default
Value
Description
BKey 0 64-bit security Key to assign to BMA
agents.
BKeyLease 0 ServiceRecord lease with SA in seconds,
0=infinite
Overrides of the Common.Shared parameters
The Common.Shared parameters can be overridden in the Bm using the
parameters described in Table 3-32
IB0054608-01 B 3-69