Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

3–Fabric Manager Configuration
Configuring the QLogic Fabric Manager
Table 3-27. Pm CongestionWeights Parameters (Continued)
Parameter
Default
Value
Description
PortXmitInefficiencyPct10 1 Weight for PortXmitfInefficiency
on QLogic QDR switches as a percentage
of time that the port was congestion
when it was busy. The percentage is multiplied
by 10 so it has a range from 0 to
1000.
0 causes counter to be ignored
PortXmitWaitCongestionP
ct10
PortXmitWaitInefficiencyP
ct10
0 Weight for PortXmitCongestion on
QLogic Host Channel Adapters as a percentage
of time that the port was out of
transmit credits. The percentage is multiplied
by 10 so it has a range from 0 to
1000.
0 causes counter to be ignored.
1 Weight for PortXmitInefficiency on
QLogic Host Channel Adapters as a percentage
of time that the port was out of
transmit credits when it was busy. The
percentage is multiplied by 10 so it has a
range from 0 to 1000.
0 causes counter to be ignored.
Pm Sweep Operation Control
The parameters shown in Table 3-28 control the operation of the PM during each
sweep.
IB0054608-01 B 3-61