Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

3–Fabric Manager Configuration
Configuring the QLogic Fabric Manager
Table 3-25. Pm ThresholdsExceededMsgLimit Parameters
Parameter
Default
Value
Description
SmaCongestion 0 Maximum ports per PM Sweep to log if
exceeds configured threshold. A value of
0 will suppress logging of this class of
threshold exceeded errors.
Security 10 Maximum ports per PM Sweep to log if
exceeds configured threshold. A value of
0 will suppress logging of this class of
threshold exceeded errors.
Routing 10 Maximum ports per PM Sweep to log if
exceeds configured threshold. A value of
0 will suppress logging of this class of
threshold exceeded errors.
Integrity Weights
The parameters shown in Table 3-26 control the weights for the individual
counters which are combined to form the Integrity count. These parameters
can be used in the IntegrityWeights section.
Table 3-26. Pm IntegrityWeights Parameters
Parameter
Default
Value
Description
SymbolErrors 1 Weight for SymbolError counter,.
0 causes counter to be ignored
LinkErrorRecovery 30 Weight for linkErrorRecovery counter.
0 causes counter to be ignored
LinkDowned 30 Weight for LinkDowned counter.
0 causes counter to be ignored
PortRcvErrors 1 Weight for PortRcvErrors counter.
0 causes counter to be ignored
LocalLinkIntegrityErrors 30 Weight for LocalLinkIntegrity counter.
0 causes counter to be ignored
IB0054608-01 B 3-59