Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

3–Fabric Manager Configuration
Configuring the QLogic Fabric Manager
Table 3-24. Pm Parameters (Continued)
Parameter
TotalImages
FreezeFrameImages
Default
Value
10
5
Description
The PM can retain recent fabric topology
and performance data. Each such dataset
is referred to as an Image. Images
allow for access to recent history and/or
Freeze Frame by clients. Each image
consumes memory, so care must be
taken not to take an excessive amount of
memory, especially for larger fabrics
TotalImages – total images for history
and freeze
FreezeFrameImages – max unique frozen
images
FreezeFrameLease 60 IF a PA client application hangs or dies,
after this set time, all its frozen images
will be released
Specified in seconds
Threshold Exceeded Message Limit
The parameters shown in Table 3-25 limit how many ports which exceed their Pm
Thresholds will be logged per sweep. These can avoid excessive log messages
when extreme fabric problems occur. These parameters can be used in the
ThresholdsExceededMsgLimit section.
Table 3-25. Pm ThresholdsExceededMsgLimit Parameters
Parameter
Default
Value
Description
Integrity 10 Maximum ports per PM Sweep to log if
exceeds configured threshold. A value of
0 will suppress logging of this class of
threshold exceeded errors.
Congestion 0 Maximum ports per PM Sweep to log if
exceeds configured threshold. A value of
0 will suppress logging of this class of
threshold exceeded errors.
3-58 IB0054608-01 B