Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

3–Fabric Manager Configuration
Configuring the QLogic Fabric Manager
Table 3-19. Additional Sm Parameters (Continued)
Parameter
Default
Value
Description
LogLevel 2 Note: Overrides the Common.Shared
LogLevel Settings
Sets log level option for SM:
• 0 = disable vast majority of logging
output.
• 1 = fatal, error, warn (syslog CRIT,
ERR, WARN).
• 2 = +notice, INFIIINFO (progress messages)
(syslog NOTICE, INFO).
• 3 = +INFO (syslog DEBUG).
• 4 = +VERBOSE and some packet
data (syslog DEBUG).
• 5 = +debug trace info (syslog DEBUG)
This parameter is ignored for the
Embedded Fabric Manager. Consult
the QLogic 12000 Chassis User’s
Guide for information on configuring
chassis logging options.
LogFile
Note: overrides Common.Shared setting.
Sets log output location for SM. By
default (or if this parameter is empty) log
output is accomplished using syslog.
However, if a LogFile is specified, logging
will be done to the given file. LogMode
further controls logging. This parameter is
ignored for the QLogic Embedded Fabric
Manager. Consult the QLogic 12000
Chassis User’s Guide for information on
configuring chassis logging options.
SyslogFacility Local6 Note: overrides Common.Shared setting.
For the Host FM, controls what syslog
facility code is used for log messages,
Allowed values are: auth, authpriv, cron,
daemon, ftp, kern, local0-local7, lpr, mail,
news, syslog, user, or uucp. For the
Embedded FM, this parameter is ignored
IB0054608-01 B 3-49