Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

3–Fabric Manager Configuration
Configuring the QLogic Fabric Manager
Table 3-17. Sm Logging and Debug Parameters (Continued)
Parameter
Default
Value
Description
SmPerfDebug 0 If 1, then log additional SM sweep info.
SaPerfDebug 0 If 1, then log additional SA query info.
Log additional SA query info
SM_0_sa_debug_perf:dec
• 0
#SM_0_debug:dec
• 0
#SM_0_sa_debug_rmpp:dec
Miscellaneous
In addition the SM supports the parameters described in the following sections.
LID
LID can be set for this SM as shown in Table 3-18
Table 3-18. Additional Sm Parameters
Parameter
Default
Value
Description
LID 0 LID for this SM, 0=pick any available.
0 is recommended.
Overrides of the Common.Shared parameters
The Common.Shared parameters can be overridden in the SM using the
parameters described in Table 3-19
Table 3-19. Additional Sm Parameters
Parameter
Default
Value
Description
Priority 0 0 to 15, higher wins.
ElevatedPriority
0 to 15, higher wins.
3-48 IB0054608-01 B