Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

3–Fabric Manager Configuration
Configuring the QLogic Fabric Manager
Table 3-10. Sm Fabric Configuration Parameters (Continued)
Parameter
Default
Value
Description
LinkSpeedOverride 0 When enabled (1), the SM will adjust the
Link Speed of devices which come up in
SDR but support Link Speeds of DDR or
QDR on both sides of the link.
When disabled (0), the SM will not alter link
speeds.
This feature is used to handle some DDR or
QDR devices whose links come up at SDR
when connected to newer InfiniBand
devices.
3-34 IB0054608-01 B