checklist - ERAU ETA - Embry-Riddle Aeronautical University
checklist - ERAU ETA - Embry-Riddle Aeronautical University
checklist - ERAU ETA - Embry-Riddle Aeronautical University
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PA-28R-201 SOP 83<br />
the landing runway heading. CHECK the AVIONICS by verifying that the<br />
communication and navigation frequencies are SET:<br />
If IFR:<br />
- Verify that the marker beacon switch is ON, if needed<br />
- Set navigation/communication frequencies for the planned approach<br />
- Set anticipated frequencies on standby<br />
- If equipped, set the ADF receiver to the desired frequency<br />
- Set the desired course in the HSI and CDI<br />
- Identify the navaids to be used for approach<br />
- Set the GPS for the approach procedure or destination airport<br />
- If equipped, set the Autopilot/Flight Director for the approach, if<br />
desired.<br />
7. SEATBELTS/HARNESSES ON<br />
Ensure that all occupant(s’) SEATBELTS and shoulder HARNESSES, if<br />
applicable, are ON and adjusted (per 14 CFR Part 91.107).<br />
8. DESCENT CHECKLIST COMPLETE<br />
Upon completion of the DESCENT CHECKLIST, verify that all items have<br />
been accomplished and that the <strong>checklist</strong> is COMPLETE.<br />
Rev 06 © <strong>Embry</strong>-<strong>Riddle</strong> <strong>Aeronautical</strong> <strong>University</strong> Revised 07-01-2012
Change language