checklist - ERAU ETA - Embry-Riddle Aeronautical University
checklist - ERAU ETA - Embry-Riddle Aeronautical University
checklist - ERAU ETA - Embry-Riddle Aeronautical University
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
22 PA-28R-201 SOP<br />
INITIAL AIRCRAFT ACCEPTANCE<br />
CLIPBOARD CHECK<br />
Verify that the aircraft Hobbs meter and Tachometer agree with what<br />
is entered on the condition board.<br />
Review past discrepancies and deferred items to ensure that no open<br />
discrepancies exist.<br />
Verify that all aircraft and equipment inspections are current<br />
including:<br />
100-hour inspection<br />
Annual Inspection<br />
24-month Transponder Test and Inspection<br />
24-month Altimeter, Pitot-Static System, and automatic pressure<br />
altitude reporting system (Mode C) Test and Inspection<br />
12-month ELT Inspection<br />
ELT Battery<br />
VOR Accuracy Check (if applicable)<br />
Survival Kit<br />
Check oil and fuel levels first to avoid any delays on departure.<br />
Clean the interior and exterior sides of the windshield with approved<br />
cleaning solution and towels. A clean windshield increases visibility<br />
and collision avoidance. Ensure that there are no cracks in the<br />
windshield. Do not place any item(s) (i.e. headsets, clipboard, etc.)<br />
on top of the glare shield panel, as this can scratch the windshield.<br />
Revised 07-01-2012 © <strong>Embry</strong>-<strong>Riddle</strong> <strong>Aeronautical</strong> <strong>University</strong> Rev 06