checklist - ERAU ETA - Embry-Riddle Aeronautical University

136 PA-28R-201 SOP
PROPELLER OVERSPEED CHECKLIST
1. THROTTLE ............................................................................... REDUCE
2. OIL PRESSURE .......................................................................... CHECK
3. PROPELLER CONTROL .................................... FULL DECREASE/SET
(if control available)
4. AIRSPEED ................................................................................ REDUCE
5. THROTTLE ...................................... AS REQUIRED/BELOW 2700 RPM
6. AIRPORT ........................................................................................ LAND
7. PROPELLER OVERSPEED CHECKLIST ............................ COMPLETE
1. THROTTLE REDUCE
REDUCE the THROTTLE to maintain propeller speed below 2700 RPM.
2. OIL PRESSURE CHECK
CHECK the OIL PRESSURE to determine if the engine is developing
sufficient pressure.
3. PROPELLER CONTROL FULL DECREASE/SET
(if control available)
Move the PROPELLER CONTROL to FULL DECREASE to obtain control
of the propeller speed. SET if any control is avaialble.
4. AIRSPEED REDUCE
REDUCE the indicated AIRSPEED as much as practical to assist in
maintaining propeller speed below 2700 RPM or as set.
5. THROTTLE AS REQUIRED/BELOW 2700 RPM
Set the THROTTLE AS REQUIRED to assist in maintaining propeller
speed BELOW 2700 RPM, or as set.
6. AIRPORT LAND
LAND at the nearest suitable AIRPORT as soon as practical.
7. PROPELLER OVERSPEED CHECKLIST COMPLETE
Upon completion of the PROPELLER OVERSPEED CHECKLIST, verify
that all items have been accomplished and that the checklist is
COMPLETE.
Revised 07-01-2012 © Embry-Riddle Aeronautical University Rev 06