checklist - ERAU ETA - Embry-Riddle Aeronautical University

102 PA-28R-201 SOP
NOTE
Avoid “locking” the wheels, which will cause skidding,
resulting in an increase in the stopping distance, and may
cause one or both main gear tires to blow.
4. FLAPS VERIFY (RETRACT 0º)
VERIFY that the Flap Selector Switch is in the UP position, or place the
switch in the Up position to RETRACT the FLAPS to 0º.
If insufficient runway remains for a complete stop:
5. MIXTURE CONTROL IDLE CUT-OFF
Depress the Mixture Control knob and pull the MIXTURE CONTROL to the
IDLE CUT-OFF position.
6. IGNITION SWITCH OFF
After the engine (propeller) has come to a complete stop, turn the
IGNITION SWITCH key to the OFF position.
7. BATTERY MASTER SWITCH OFF
Depress the BATTERY MASTER SWITCH to the OFF position.
8. ENGINE FAILURE DURING TAKEOFF ROLL CHECKLIST
COMPLETE
Upon completion of the ENGINE FAILURE DURING TAKEOFF ROLL
CHECKLIST, verify that all items have been accomplished and that the
checklist is COMPLETE.
Revised 07-01-2012 © Embry-Riddle Aeronautical University Rev 06