Brochure Download - Knight Farm Machinery
Brochure Download - Knight Farm Machinery Brochure Download - Knight Farm Machinery
INTEGRATED INTELLIGENCE The importance of ergonomic and easy to use machine controls is clearly understood by Knight. This is demonstrated by the control centre provided in the Claas Vista Cab. All vehicle and sprayer controls are clearly visible and placed within easy reach. HIGHLIGHTS: = The clearly arranged control centre is incorporated into = The operators hand rests easily on the multifunction the armrest and attached to the drivers seat. Its joystick (3) where they have instant control over driving position can be adjusted according to the operators speed as well as the sprayer functions. individual requirements. = There is plenty of room for the addition of a reversing = The operator has an unobstructed view of the Muller spray control (1) and the Knight Integrated Vehicle Controller (IVC) (2). camera monitor (4) if required. 1 Integrated Vehicle Controller (IVC) The IVC developed by Knight combines engine management, steering control and transmission control into one easy to use, intuitive terminal. The full colour digital display is clearly visible, with soft-touch buttons on either side of the screen to easily navigate the controller functions. 10 3 2 4 FEATURES: = The Digital Dashboard is always visible in the centre of the screen. This provides key information such as RPM and forward speed as well as fuel level, oil level and warning lights. = Selecting between Road and Field mode is easily achieved at the touch of a button. As is the control of the various steering modes. = The advanced logic of the Knight 4 wheel steering system allows seamless selection of 2 or 4 wheel steering independent of the current steering position. = Headland turning can be negotiated with ease thanks to the spray related switching - when the spray is on 2ws is activated, when the spray is off 4ws is activated. = Alternatively a floor mounted switch can also be used to switch between 2 and 4 wheel steering. = Hillside correction mode allows the operator to steer the sprayers rear wheels slightly uphill. This compensates for any machine drift experienced whilst working on a hillside. = Full Engine diagnostic information can also be accessed via the IVC.
INTEGRATED INTELLIGENCE All sprayer functions are controlled with the MULLER Elektronik multifunction computer. These computers provide precision farming capability through an intuitive and user friendly interface. MULLER BASIC-Terminal The Muller BASIC terminal is the ideal option for the operator who would like more sophistication on their machine. The multifunction computer provides a simple control layout for the operation of all sprayer functions and includes the following features: = 15cm anti reflective display with 10 softkeys. = Muller CAN-bus system with simple single plug connection between tractor and sprayer. = Multifunction joystick giving the operator greater control over important functions while working the sprayer, allowing them to be carried out easily and quickly. = Manual boom section switching up to 9 spray sections. = Sequential or nest spray section switching. = Full boom hydraulic control with manual boom lift, tilt and folding functions from either terminal or multifunction grip. = Automatic or manual spray rate regulation. = Current speed and application rate and tank volume constantly displayed. = Daily and total counters. MULLER COMFORT-Terminal Available as an upgrade, the Muller COMFORT controller combines all the features of the BASIC controller into an ISOBUS terminal. Additional features include: = Large VGA (640 x 480 pixel) colour, anti-reflective display with 12 soft keys. = Split display main and header. = ISOBUS 11783 system & terminal. = USB data transfer. OPTIONS AVAILABLE: DISTANCE-Control Automatically maintains the pre set distance from the boom to the target surface. A combination of boom lift and tilt is used to control the boom position. Automatic boom raise at headlands. TANK-Control Electronic Tank Sight Gauge Exact gauge of the tank contents. Residual amount in the tank is taken into account when filling. Can be linked into Knight Finger Tip Control to shut off filling at a desired amount. Tank content automatically displayed on the Muller screen in the cab. SECTION-Control Enables the automatic switching on and off of the spray sections, any time a sprayer section moves into a previously applied area it is automatically switched off. Sprayed area and overlaps displayed. Field boundary, boom sections automatically switched off outside working area. TRACK-Leader II D-GPS, parallel or contour guidance. 2D or 3D and birds eye view Adjustable zoom of the field Headland guidance Obstacle warning Storing and continuing the navigation at any time. Multiple Nozzle Control Airtec nozzle control TASK-Management Input and output job data to and from the farm PC. FarmPilot Tracking of position data Order progressing Fleet management Machine monitoring and diagnosis FEILD-Nav Satellite navigation 11
- Page 1 and 2: Self - Propelled AN INVESTMENT IN Q
- Page 3 and 4: VEHICLE FEATURES SPACIOUS AND COMFO
- Page 5 and 6: 1800 SERIES VEHICLE SPECIFICATION E
- Page 7 and 8: 2000 SERIES VEHICLE SPECIFICATION E
- Page 9: OPERATOR ENVIRONMENT Outside the ca
INTEGRATED INTELLIGENCE<br />
The importance of ergonomic and easy<br />
to use machine controls is clearly<br />
understood by <strong>Knight</strong>. This is<br />
demonstrated by the control centre<br />
provided in the Claas Vista Cab. All<br />
vehicle and sprayer controls are clearly<br />
visible and placed within easy reach.<br />
HIGHLIGHTS:<br />
= The clearly arranged control centre is incorporated into = The operators hand rests easily on the multifunction<br />
the armrest and attached to the drivers seat. Its<br />
joystick (3) where they have instant control over driving<br />
position can be adjusted according to the operators speed as well as the sprayer functions.<br />
individual requirements. = There is plenty of room for the addition of a reversing<br />
= The operator has an unobstructed view of the Muller<br />
spray control (1) and the <strong>Knight</strong> Integrated Vehicle<br />
Controller (IVC) (2).<br />
camera monitor (4) if required.<br />
1<br />
Integrated Vehicle Controller (IVC)<br />
The IVC developed by <strong>Knight</strong> combines engine management,<br />
steering control and transmission control into one easy to use,<br />
intuitive terminal. The full colour digital display is clearly<br />
visible, with soft-touch buttons on either side of the screen to<br />
easily navigate the controller functions.<br />
10<br />
3<br />
2<br />
4<br />
FEATURES:<br />
= The Digital Dashboard is always visible in the centre of the<br />
screen. This provides key information such as RPM and forward<br />
speed as well as fuel level, oil level and warning lights.<br />
= Selecting between Road and Field mode is easily achieved at the<br />
touch of a button. As is the control of the various steering modes.<br />
= The advanced logic of the <strong>Knight</strong> 4 wheel steering system allows<br />
seamless selection of 2 or 4 wheel steering independent of the<br />
current steering position.<br />
= Headland turning can be negotiated with ease thanks to the<br />
spray related switching - when the spray is on 2ws is activated,<br />
when the spray is off 4ws is activated.<br />
= Alternatively a floor mounted switch can also be used to switch<br />
between 2 and 4 wheel steering.<br />
= Hillside correction mode allows the operator to steer the<br />
sprayers rear wheels slightly uphill. This compensates for any<br />
machine drift experienced whilst working on a hillside.<br />
= Full Engine diagnostic information can also be accessed via the<br />
IVC.
Change language