02.12.2014 Views

NORDIC SKI PREPARATION

NORDIC SKI PREPARATION

NORDIC SKI PREPARATION

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

ROTO BRUSH PROGRAM<br />

Use of a Roto Brush is a great way to save time<br />

when there are many skis or boards to prepare.<br />

For club team racers where coaches and parents<br />

are preparing the skis for the entire team, a Roto<br />

Brush is almost a necessity.<br />

RPMs from about 1500 are used for brushing.<br />

T16M Horsehair<br />

The best all round brush. The initial brush on<br />

all waxes. Used on regular waxes and Cera F.<br />

(Do not use the same brush on regular wax and<br />

Cera F.) 100 mm wide.<br />

T17W White or Blue Nylon<br />

Polish brush for wax and Cera F. 100 mm wide.<br />

T15HS Horsehair and Steel<br />

Wax brush. The most used wax brush in World<br />

Cup. Horsehair is used first finish with steel.<br />

Horsehair is used first to avoid that the steel<br />

is “clogging” up. Deburr the steel lightly with<br />

sandpaper #100 before using it first time on skis.<br />

140 mm wide.<br />

T15DB Horsehair and Soft Nylon<br />

Economy all round brush for both wax and Cera F<br />

powder. Start with the horsehair and finish with<br />

the nylon. 140mm wide.<br />

T19S Steel<br />

Fine steel brush to clean base structures before<br />

waxing. Can be used as second brush on wax after<br />

T16M Horsehair brush.<br />

T18C Cork<br />

High quality cork for application of Cera F powder,<br />

Cera Solid and Cera Liquid. Specially recommended<br />

for Cera Solid. 100 mm wide.<br />

T18F Fleece<br />

The Fleece-Roto improves Cera F performance<br />

when the snow is warmer than -4°C. Apply the<br />

Cera powder to the base with a wax iron first. The<br />

Fleece-roto should be used a couple of times to<br />

get optimal performance. NB! Use separate Fleece<br />

brushes for each type of Cera F. 100 mm wide.<br />

T16M<br />

T17W<br />

T14HN<br />

T14HPS<br />

T14SS - 100 mm<br />

T14SM - 140 mm<br />

T15HPS<br />

Handle with 140 mm driveshaft and 100 mm wide<br />

protection cover.<br />

T19S<br />

T14SL - 200 mm<br />

T14HPS<br />

Handle with 100 mm driveshaft and protection<br />

cover.<br />

T18C<br />

T15HS<br />

T18F<br />

T15DB<br />

NOTE!<br />

• Always use safety glasses when rotobrushing.<br />

• Use the Protective Cover (T12PS) to avoid<br />

getting wax particles and powder in the<br />

face.<br />

• Don’t press too hard, let the brush do<br />

the work!<br />

• Brush from tip to tail with the brush rotation<br />

throwing the wax particles towards the tail.<br />

24 25

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!