NORDIC SKI PREPARATION

CERA F POWDERS,
SOLIDS AND LIQUID
SWIX CERA F
• The Reference for Competitors and
Athletes.
• The Fastest and most frequently used.
• The Highest Purity.
• The Most Podium Results.
New productions and additional research within
the field of Cera F has made Swix able to improve
the quality on our Cera F products the coming
season. Testing within the laboratory as well as in
the field is an important part of the work aiming
for further refinements in the quest to be able to
supply racers and snowboard riders with the best
possible glide performance.
There are many fluorocarbon products in the
market, but very few have gone through the
synthesizing steps to modify the fluorocarbon
powder like Cera F for specific use on ski and
snowboard bases.
Swix Cera F has a coded batch production system
for tracking quality control. The result is:
• High speed and acceleration
• High resistance to snow contaminants
• Exceptional purity for best performance
• High longevity, outstanding base bonding
capacity
Also, Cera F powders, waxes and liquids do not
contain CFCs and are not harmful to the environment.
“Dr. Wax” Leif Axell Torgersen measures contact
angles between water and wax.
Safety reminder
Neither Cera F powder or its vapor from ironing
should be exposed to temperatures
above 300°C (570°F). Therefore avoid exposure
to torches, heat guns, space heater, and
cigarette smoking.
Recommended ironing temperature for
Cera F is approximately 150°C (300°F) to
165°C (330°F), which is far below the level
for Cera F decomposition.
12 13