Download PDF - Teesing

POLYAMIDE
PA12
TECHNICAL SPECIFICATIONS
Temperature °C -40 - +100
Hardness
Shore D61
Outer diameter (D) mm 2 - 16
Inner diameter (d) mm 1 - 13
Wall thickness (s) mm 0.5 – 1.57
Operating pressure * bar 9-25
Burst pressure * bar 3 x
operating pressure
* at temperature of 20 °C
PROPERTIES
• Wide temperature and application range
• Colour black: UV resistant
• Pressure and impact resistant
• Good chemical resistance
• Smooth surface
• Also available in PA6 (high pressure)
Is available on request in other lengths than the
standard coil.
PRODUCT INFORMATION
COLOURS AVAILABLE
neutral black blue green yellow red
CHEMICAL RESISTANCE
APPLICATION
• Oils and fats, fuels, lubricants
• Compressed air
• Hydraulic fluids
• Hydraulics
• Non-chlorine cleaning agents and solvents
• Negative pressure
• Diluted organic acids
• Cooling lines fuel and lubricant systems
• Very mild mineral acids, bases and salt solutions
Type bar D d s Bending radius kg/100m
PAW 2/1x0,5, 100m 17 2.0 1.00 0.50 15.0 0.450
PAW 3/2x0,5, 100m 16 3.0 2.00 0.50 15.0 0.450
PAW 4/2x1, 100m 25 4.0 2.00 1.00 25.0 0.970
PAW 4/2,7x0,65, 100m 30 4.0 2.70 0.65 22.0 1.100
PAW 5/3x1, 100m 17 5.0 3.00 1.00 30.0 1.140
PAW 6/4x1, 100m 20 6.0 4.00 1.00 35.0 1.620
PAW 6/4x1, 500m 20 6.0 4.00 1.00 35.0 1.620
PAW 6,35/4,35x1, 100m 18 6.3 4.36 1.00 45.0 1.810
PAW 8/6x1, 100m 14 8.0 6.00 1.00 55.0 2.270
PAW 9,52/7x1,26, 50m 15 9.5 7.00 1.26 75.0 3.475
PAW 10/7x1,5, 50m 17 10.0 7.00 1.50 70.0 3.680
PAW 10/8x1, 50m 11 10.0 8.00 1.00 90.0 2.910
PAW 10/7x1,5, 50m 14 10.0 7.00 1.50 75.0 3.540
PAW 12/10x1, 50m 9 12.0 10.00 1.00 92.0 4.000
PAW 12/9x1.5, 50m 15 12.0 9.00 1.50 75.0 5.100
PAW 12,7/9,56x1,57, 50m 6 12.7 9.56 1.57 75.0 5.300
PAW 15/12x1.5, 50m 13 15.0 12.00 1.50 115.0 6.570
PAW 15/13x1, 50m 9 15.0 13.00 1.0 85.0 6.000
6
7
WWW.TEESING.COM