OPERATOR'S MANUAL - Ridgid
OPERATOR'S MANUAL - Ridgid OPERATOR'S MANUAL - Ridgid
ON I P U L L P U S H O 0° 15° 30° 4 1 1 2 4 8 3 4 3 8 1 8 FEATURES SPECIFICATIONS n Blade Width ...................................................................................................................1/8 in. to 3/4 in. (3 mm to 19 mm) n Blade Length .....................................................................................................................................93-1/2 in. (237.5 cm) n Table Size......................................................................................................................14 in. x 14 in. (355 mm x 355 mm) n Input.............................................................................................................................................120 Volt, 60Hz, 10 amps n No Load Speed...................................................................................................................................................2700 FPM n Dust Port.............................................................................................................................................2-1/4 in. (57.15 mm) n Net Weight ..................................................................................................................................................187 lbs. (85 kg) UPPER COVER BLADE TENSION KNOB SWITCH AND SWITCH KEY BLADE GUARD ADJUSTMENT KNOB ADJUST TENSION OF BLADE TO SCALE OFF P ULL BLADE GUARD THRUST BEARINGS TRACKING KNOB BEVEL SCALE 10° BLADE GUIDES MOTOR PULLEY COVER SCALE INDICATOR SAW TABLE LOCK KNOBS DUST EXHAUST PORT BLADE HANGERS LEG STAND Fig. 6 10
FEATURES KNOW YOUR BAND SAW See Figure 6. Before attempting to use this product, familiarize yourself with all operating Features and Safety Rules. BLADE TENSION KNOB Rotation of this knob will increase or decrease the tension on the blade. TRACKING KNOB Adjusts tracking to keep blade centered on the wheels. BLADE GUIDES Blade guides provide full support of the adjustable blade. THRUST BEARINGS Thrust bearings support the back of the blade and are adjustable for the various blade widths. BLADE GUARD ADJUSTMENT KNOBS Use the blade guide adjustment knobs to adjust the blade guide assembly. This keeps the blade from twisting or breaking. SAW TABLE WITH 90° STOPS Saw table tilts for angular cuts. Ensures saw table is perpendicular to blade. Use the bevel scale under saw table to measure angular settings. TABLE LOCK KNOBS Loosening the table lock knobs allows the saw table to be tilted at different angles. Tightening the table lock knobs locks the saw table in place. HOUSING COVERS Pull knob to expose wheels during blade changes or to clean out sawdust build-up. DUST EXHAUST PORT A 2-1/4 in. (57.15 mm) dust exhaust port makes dustless cutting possible by blowing the dust away from the user. Attach to the dust exhaust port when using a dust collection system or wet/dry vac. BLADE GUARD Protects the operator from coming in contact with the blade. BLADE HANGERS Extra blades may be stored here. 11
- Page 1 and 2: ON I P U L L P U S H O 10° 0° 15
- Page 3 and 4: GENERAL SAFETY RULES WARNING: Read
- Page 5 and 6: SYMBOLS Some of the following symbo
- Page 7 and 8: GLOSSARY OF TERMS Bevel Cut A cutti
- Page 9: ELECTRICAL CHANGING MOTOR VOLTAGE S
- Page 13 and 14: LOOSE PARTS The following items are
- Page 15 and 16: ASSEMBLY UNPACKING This product req
- Page 17 and 18: ASSEMBLY MOUNTING THE MOTOR ASSEMBL
- Page 19 and 20: I ASSEMBLY MOUNTING THE SWITCH BOX
- Page 21 and 22: ASSEMBLY • Replace throat plate a
- Page 23 and 24: I P U L L P U S H O 0° 15° 30° 4
- Page 25 and 26: OPERATION WARNING: Do not allow fam
- Page 27 and 28: OPERATION TILTING THE TABLE See Fig
- Page 29 and 30: I L P ADJUSTMENTS • Rotate guard
- Page 31 and 32: MAINTENANCE LUBRICATION All the bea
- Page 33 and 34: TROUBLESHOOTING Problem Cause Solut
- Page 35 and 36: WARRANTY RIDGID ® HAND HELD AND ST
ON<br />
I<br />
P<br />
U<br />
L<br />
L<br />
P<br />
U<br />
S<br />
H<br />
O<br />
0°<br />
15°<br />
30°<br />
4<br />
1<br />
1<br />
2<br />
4<br />
8<br />
3<br />
4<br />
3<br />
8<br />
1<br />
8<br />
FEATURES<br />
SPECIFICATIONS<br />
n Blade Width ...................................................................................................................1/8 in. to 3/4 in. (3 mm to 19 mm)<br />
n Blade Length .....................................................................................................................................93-1/2 in. (237.5 cm)<br />
n Table Size......................................................................................................................14 in. x 14 in. (355 mm x 355 mm)<br />
n Input.............................................................................................................................................120 Volt, 60Hz, 10 amps<br />
n No Load Speed...................................................................................................................................................2700 FPM<br />
n Dust Port.............................................................................................................................................2-1/4 in. (57.15 mm)<br />
n Net Weight ..................................................................................................................................................187 lbs. (85 kg)<br />
UPPER<br />
COVER<br />
BLADE<br />
TENSION KNOB<br />
SWITCH AND<br />
SWITCH KEY<br />
BLADE GUARD<br />
ADJUSTMENT KNOB<br />
ADJUST<br />
TENSION<br />
OF BLADE<br />
TO SCALE<br />
OFF<br />
P<br />
ULL<br />
BLADE GUARD<br />
THRUST<br />
BEARINGS<br />
TRACKING KNOB<br />
BEVEL SCALE<br />
10°<br />
BLADE GUIDES<br />
MOTOR<br />
PULLEY COVER<br />
SCALE<br />
INDICATOR<br />
SAW TABLE<br />
LOCK KNOBS<br />
DUST<br />
EXHAUST PORT<br />
BLADE<br />
HANGERS<br />
LEG STAND<br />
Fig. 6<br />
10
Change language