KUKA Posiflex KPF1-MB Family - KUKA Robotics

5 Transportation
5 Transportation
5.1 Transportation
Description
Move the positioner into its transport position each time it is transported. It
must be ensured that the positioner is stable while it is being transported. The
positioner must remain in its transport position until it has been fastened in position.
Before the positioner is lifted, it must be ensured that it is free from obstructions.
Remove all transport safeguards, such as nails and screws, in
advance. First remove any rust or glue on contact surfaces.
Warning!
The positioner may tip during transportation. Risk of injury and damage to
property. The positioner must be secured to prevent it from tipping.
Caution!
Use of unsuitable handling equipment may result in damage to the positioner.
Only use handling equipment with a sufficient load-bearing capacity.
The positioner may only be transported in the manner specified here.
Transport
position
The positioner must be in the transport position before it is transported, i.e. it
must not be tilted for transporting purposes.
Fig. 5-1: Transport position
Transport dimensions
The dimensions for the positioner can be noted from the following drawings.
The position of the center of mass and the weight vary according to the
specific configuration. The specified dimensions refer to the positioner without
equipment.
Fig. 5-2: Transport dimensions, top view
Issued: 11.08.2010 Version: Spez Posiflex KPF1-MB Familie V3 en
41 / 55