KUKA Posiflex KPF1-MB Family - KUKA Robotics
KUKA Posiflex KPF1-MB Family - KUKA Robotics
KUKA Posiflex KPF1-MB Family - KUKA Robotics
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4 Planning<br />
4.2 <strong>KPF1</strong>-<strong>MB</strong>2000 mounting base with centering<br />
Description<br />
This section describes the mounting base of the positioner <strong>KPF1</strong>-<strong>MB</strong>2000.<br />
The positioner is installed and secured on the floor, directly onto the concrete<br />
foundation. The surface of the foundation must be level and smooth. The<br />
minimum dimensions must be observed.<br />
The mounting base with centering consists of:<br />
• Bedplates<br />
• Resin-bonded anchor<br />
• Fasteners<br />
Fig. 4-4: <strong>KPF1</strong>-<strong>MB</strong>2000 mounting base with centering<br />
1 Hexagon bolt 3 Resin-bonded anchor<br />
2 Bedplate 4 Pin for centering<br />
Grade of concrete<br />
for foundations<br />
Dimensioned<br />
drawing<br />
When producing foundations from concrete, observe the load-bearing<br />
capacity of the ground and the country-specific construction regulations. The<br />
concrete must have no cracks and fulfill the following norms for quality:<br />
• B25 according to DIN 1045:1988<br />
• C20/25 according to DIN EN 206-1:2001/DIN 1045-2:2001<br />
The following illustrations provide all the necessary information on the mounting<br />
base, together with the required foundation data.<br />
Issued: 11.08.2010 Version: Spez <strong>Posiflex</strong> <strong>KPF1</strong>-<strong>MB</strong> Familie V3 en<br />
31 / 55