HP xw6400 Workstation - Nts

HP xw6400 Workstation - Nts HP xw6400 Workstation - Nts

01.12.2014 Views

QuickSpecs HP xw6400 Workstation Storage Tower configuration Minitower Quantity Supported Position Supported Controller Optional Diskette Drive 1 3 IDE 5.25" storage drive bays (position 1 drive bay is limited to 198 mm depth when optional smart cover solenoid lock is installed; position 2 drive bay can be converted to an internal 3.5" 3rd hard drive bay with optional bracket) 3.5" storage drive bays with acoustic dampening rail assemblies 2 1, 2 IDE (or SATA with new SATA optical drives) 2 (3) 5 (and 2, for 3rd drive using optical bay) SATA or optional SAS Factory Integrated RAID* DA - 12505 Worldwide — Version 21 — August 16, 2007 Page 22

QuickSpecs HP xw6400 Workstation Storage SATA and SAS may be mixed only in a Windows configuration and with the inclusion of an optional SAS controller. Here are the rules for mixing hard drives: 1. 2. The boot/data drive must be SATA to load before any SAS drive. Any size or speeds may be chosen for drives In non-mixed Microsoft Windows and Linux systems, rules 2 & 3 apply. Configure-to-order RAID configs must all have the same size/speed hard drives. Up to 4 channels of SATA can be supported natively. NOTE*: Factory Integrated RAID 0 Configuration (Striped Array) and RAID 1 Configuration (Mirrored Array) requires 2 hard drives with identical speeds, capacity and interface. Hardware RAID is not supported on Linux systems. The Linux kernel, with built-in software RAID, provides excellent functionality and performance. It is a good alternative to hardware-based RAID. Please visit http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00060684/c00060684.pdf for RAID capabilities with Linux. DA - 12505 Worldwide — Version 21 — August 16, 2007 Page 23

QuickSpecs<br />

<strong>HP</strong> <strong>xw6400</strong> <strong>Workstation</strong><br />

Storage<br />

Tower configuration<br />

Minitower<br />

Quantity Supported Position Supported Controller<br />

Optional Diskette Drive 1 3 IDE<br />

5.25" storage drive bays<br />

(position 1 drive bay is limited<br />

to 198 mm depth when<br />

optional smart cover solenoid<br />

lock is installed; position 2<br />

drive bay can be converted to<br />

an internal 3.5" 3rd hard drive<br />

bay with optional bracket)<br />

3.5" storage drive bays with<br />

acoustic dampening rail<br />

assemblies<br />

2 1, 2 IDE (or SATA with new SATA<br />

optical drives)<br />

2 (3) 5 (and 2, for 3rd drive using<br />

optical bay)<br />

SATA or optional SAS<br />

Factory Integrated RAID*<br />

DA - 12505 Worldwide — Version 21 — August 16, 2007 Page 22

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!