MODEL FIII-SERIES CONTROL INSTALLATION ... - Agencespl.com

More documents

Recommendations

Info

REV 1.1 FIII SERIES CONTROL Features & Specifications Features Overview 1. Four levels of external control inputs, including modulation and staging that provide application flexibility. 2. Digital Communications Control ( analog 4-20ma and 0-10vdc control supported, but not required). A. Boiler to Boiler : Heat Net (H-Net) B. Building Management System (MODBUS, Optional BACNET or LONWORKS) to Boiler 3. Distributed control using the Heat Net (H-Net) protocol for up to 16 boilers, or up to 3 boilers using dedicated relays. Eliminates the need for “wall mounted” controls. 4. System/Boiler operating status text display 5. Interlock, Event, and System logging with a time stamp. 6. Advanced PID algorithm optimized for the FIII series boilers. 7. (4) Dedicated temperature sensor inputs for: Outside Air Temperature, Supply (Outlet) Temperature, Return Temperature (Inlet), and Header Temperature. 8. Automatically detects the optional temperature sensors on power up. 9. Menu driven calibration and setup menus with a bright (Adj.) 4 line Vacuum Fluorescent Display. 10. (8) Dedicated 24vac interlock monitors, and 8 dedicated 120vac system monitors used for diagnostics and providing feedback of faults and system status. 11. Multiple circulator pump control modes. 12. Combustion Air Damper control with proof time. 13. Optional USB/RS485 network plug-in to allow firmware updates or custom configurations. 14. Optional BACNET or LONWORKS interface. 15. Alarm contacts. 16. Runtime hours. 17. Outdoor Air Reset with programmable ratio. 18. Time of Day clock to provide up to (4) night setback temperatures. 19. Failsafe mode when a Building Management System is controlling setpoint. If communications is lost, the boiler/system can run off the Local Setpoint. Page 4
REV 1.1 FIII SERIES CONTROL Specifications Control Microprocessor based PID modulating control ( NOT a safety limit ) Environment -40 F to 140 F,
Page 1 and 2: REV 1. 1 FIII SERIES CONTROL MODEL
Page 3: REV 1.1 FIII SERIES CONTROL and the
Page 7 and 8: REV 1.1 FIII SERIES CONTROL Setup &
Page 9 and 10: ohm method (type 4). The relay cont
Page 11 and 12: REV 1.1 FIII SERIES CONTROL FIGURE
Page 13 and 14: REV 1.1 FIII SERIES CONTROL FIGURE
Page 15 and 16: REV 1.1 FIII SERIES CONTROL Calibra
Page 17 and 18: REV 1.1 FIII SERIES CONTROL Default
Page 19 and 20: REV 1.1 FIII SERIES CONTROL LOCAL A
Page 21 and 22: REV 1.1 FIII SERIES CONTROL MODBUS
Page 23 and 24: REV 1.1 FIII SERIES CONTROL Boiler
Page 25 and 26: REV 1.1 FIII SERIES CONTROL Situati
Page 27 and 28: REV 1.1 FIII SERIES CONTROL Page 27
Page 29 and 30: REV 1.1 FIII SERIES CONTROL FIII SE
Page 31 and 32: REV 1.1 FIII SERIES CONTROL Workshe
Page 33 and 34: REV 1.1 FIII SERIES CONTROL Thermis

MODEL FIII-SERIES CONTROL INSTALLATION ... - Agencespl.com

Create successful ePaper yourself

Delete template?

Save as template?