Manual 3060 System - SimonsVoss technologies

Manual – Digital locking cylinder 3061
Page 14
3. Manual engage (default setting)
The locking cylinder does not engage automatically at the appointed time but
remains disengaged until a subsequent command is received from an authorised
transponder.
4. Automatic engage
The locking cylinder does not engage automatically at the appointed time but
remains disengaged until a subsequent command is received from the first
transponder. You should select this option of you want the locking cylinder to
engage automatically at the appointed time.
5. Transponder active
• Always
Transponders cannot usually be used when the door is freely accessible.
However, you should select this option if you want to be able to lock a freely
accessible door (for instance if everyone has left the building). In other
words, if you want to manually override the time-switch.
• Only when locked
In this mode the transponder will not work during the general access period,
i.e. when the cylinder is engaged.
3.10 Flip-Flop
Deactivates the pulse mode (default setting), the pulse length is no longer relevant.
When in flip-flop mode the locking cylinder will change its status from engaged to
disengaged or vice versa whenever a transponder is operated. This mode is
recommendable if, for instance, you want to make a door freely accessible without the
use of a transponder.