Manual 3060 System - SimonsVoss technologies

Manual – Digital locking cylinder 3061
Page 13
3.7 No acoustic confirmation signals
This checkbox should be activated if you want to suppress the acoustic confirmation
signal for programming from the locking cylinder.
This function is especially practical for network-based programming or data reading, as
the acoustic signal emitted by the locking cylinder is not usually audible due to the
distance.
3.8 Logging unauthorised access attempts
As a rule, the system only logs authorised transponder operations. You will need to
select this option if you wish to log attempts to open the door using an unauthorised
transponder.
Unauthorised access attempts include:
• Access attempts without authorisation
• Access attempts outside of the authorised time zone
• Access attempts under activated alarm system and simultaneous use
of a SimonsVoss shunt lock.
As a general rule the system only logs transponders belonging to the same
locking system, i.e. they must have the same locking system ID (SID).
3.9 Time-switch function
This is only possible with the .ZK version. The time-switch function requires a time
zone plan to be loaded which then activates (engages) the locking cylinder during the
specified times (in Group 5 - Locking). A door can be freely accessible by turning the
knob during the day, but only accessible by means of transponder during the night.
Caution: The lock does not engage automatically when the knob is disengaged.
The following options are available in the field "Time-controlled activation" when the
time-switch function is selected:
1. Manual disengage
The locking cylinder does not disengage automatically at the appointed time but
remains engaged until a subsequent command is received from an authorised
transponder.
2. Automatic disengage (default setting)
The locking cylinder disengages automatically at the time appointed in the time
zone plan.