Manual 3060 System - SimonsVoss technologies

MANUAL - BIOMETRIC READER Q3008
Page 8
2.3 Operating statuses
The Q3008 biometric reader distinguishes between 5 different operating statuses:
Status:
Standby
Recognize
Learn
Delete
Battery warning
Explanation:
The biometric reader is in idle mode and consumes very little power.
Recognize mode is the status used before an attempt is made to open
a door. Once an authorised fingerprint is recognised, the lock is
addressed by radio and can then be opened.
In this mode, the relevant integrated transponders (up to 50) can be
programmed or reset with the SimonsVoss software.
The reader can store up to 50 different fingerprints.
In delete mode, learned fingerprints can be deleted. You can delete
individual fingerprints or all fingerprints.
A battery warning system gives you adequate warning when a battery
needs replacing.
2.4 Operation
Once the Q3008 biometric reader has been commissioned and configured, it forms a
‘wireless circuit’ with a SimonsVoss lock within the System 3060. The following
chapters describe in detail how to program individual fingerprints and the relevant
transponder data records and how to use the Q3008 biometric reader.
Finger guide
Sensor
LED
8