Manual 3060 System - SimonsVoss technologies

MANUAL - BIOMETRIC READER Q3008
Page 7
Activate the biometric reader by placing your
finger on the finger guide (see chapter 2.4),
and then place your finger at the top of the
sensor.
Figure 1
Draw your finger across the sensor at an even
speed and applying gentle pressure.
Figure 2
Keep your finger straight and extended, i.e. do
not bend or curl it.
Figure 3
When scanning your finger please ensure that your finger remains in contact with the
sensor at all times. In other words, you should maintain gentle pressure on the sensor
during the scanning process.
7