01.12.2014 Views

Manual 3060 System - SimonsVoss technologies

Manual 3060 System - SimonsVoss technologies

Manual 3060 System - SimonsVoss technologies

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Caption<br />

Page 3<br />

SmartCD<br />

Password<br />

transponder<br />

Programming transponder<br />

Repeater (LON)<br />

Router (LON)<br />

Shunt lock function<br />

Switching<br />

transponder<br />

Time zone control<br />

Twisted-Pair<br />

The SmartCD is a programming device that was developed<br />

especially for wireless operation with a PDA. It makes it very<br />

easy to program and read out all digital components of the<br />

<strong>System</strong> <strong>3060</strong>. You can also use the PDA to match up your<br />

personal data (addresses, calendar, etc.).<br />

Instead of manually entering the password for the locking<br />

plan software, you can also transmit it over radio with the<br />

password transponder.<br />

Use the programming transponder to program Digital Locking<br />

Cylinder 3061 and Transponder 3064 devices. You do not<br />

need a PC or special system software – simply press a button.<br />

For example, you can grant or change access authorisation<br />

if you lose a key or make changes to the locking plan in<br />

small systems.<br />

The repeater (LON) is used to extend the specified cable<br />

length of 900 m (984 m) (BUS) in a segment. This requires<br />

that an additional LPI10 also be used.<br />

The router (LON) is used to separate individual segments,<br />

such as floors or buildings, for example, from one another in<br />

large networks. Likewise, routers are used as intermediary<br />

switches in long network lines.<br />

Serves the integration of an alarm system into the <strong>System</strong><br />

<strong>3060</strong>. A deactivation unit must be installed on every door that<br />

leads to a security area. The activation unit is installed at a<br />

central location and connected to the deactivation units. The<br />

alarm system can then be activated and deactivated via the<br />

activation unit using an authorised transponder. The signals<br />

are forwarded to the deactivation units, which prevent a door<br />

from being accidentally opened when the alarm system has<br />

been activated.<br />

This transponder has a two-wire cable connected to the<br />

switch contacts of the button. This cable is led to the outside<br />

of the device.<br />

Additional function of the digital components in the TC Version:<br />

Transponders can be programmed such that they are<br />

authorised for the lockings only at predetermined times.<br />

Double wire, twisted cable, used for the network cabling.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!