Manual 3060 System - SimonsVoss technologies

LON – Network 3065
Page 28
- What is an LPI-10 Compact?
An LPI-10 Compact essentially corresponds to the LPI-10, but with the difference that
the LPI-10 Compact is always designed for 62 LockNodes and does not need a
separate plug-in power supply. It is connected directly to the 230V~ at the customer.
- How many LPI-10 or LPI-10 Compact modules are needed?
At least one LPI-10 or LPI-10 Compact must be used for each segment (divided by
routers). The number depends on the particular segment structure. In principle,
however, it can be said that each LockNode in the segment must be supplied with at
least 35 V DC in order to guarantee perfect operation.
- Where should the LPI-10 or LPI-10 Compact be placed in the segment?
At least one LPI-10 or LPI-10 Compact must be used for each segment (divided by
routers). The position of the LPI-10 or LPI-10 Compact depends on the particular
segment structure. In principle, however, it can be said that placement in the middle
of the segment is the most sensible.
If you have other questions, please contact your trade partner or the manufacturer.