01.12.2014 Views

Manual 3060 System - SimonsVoss technologies

Manual 3060 System - SimonsVoss technologies

Manual 3060 System - SimonsVoss technologies

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

LON – Network 3065<br />

Page 24<br />

10.0 Planning Examples<br />

10.1 Connecting External Buildings via Twisted Pair, Modem & TCP/IP<br />

Remark: The planning and implementation of the following planning examples must<br />

be carried out by <strong>SimonsVoss</strong>. This chapter therefore offers only a short description<br />

of networking via modem and TCP/IP router.<br />

Administration Building *1<br />

Server with LDB software<br />

Connection to Building 1:<br />

The CentralNode is connected to the server via the RS-<br />

232 interface, forming the connection to the SV network.<br />

External buildings can be approached with a twisted pair<br />

cable (900 m/2950 feet as BUS).<br />

Components: CentralNode, LPI10<br />

Connection to Building 2:<br />

The analog modem (master configuration) is connected to<br />

the server via the RS-232 interface of the server, forming<br />

the connection to the external building via a telephone line.<br />

Building 2 receives the data via an analog modem (slave<br />

configuration) and makes the connection to the SV<br />

network.<br />

Components: analog SV modem (master configuration)<br />

Twisted pair (Cat5)<br />

Telephone line<br />

Building 1<br />

Connection with Cat5 cabling<br />

Required components:<br />

Router, LPI10, LockNode(s), digital<br />

component(s)<br />

Building 2<br />

Connection with analog modem<br />

Required components:<br />

Analog SV modem (slave configuration), Central<br />

Node, LPI10, LockNode(s), digital component(s)<br />

Connection to Building 3:<br />

The data is passed on to the LON/IP router via the<br />

interface of the CentralNode that is connected to the<br />

server. This router converts the data so that it can be<br />

passed on to external buildings via an existing<br />

Ethernet. The LON/IP router (slave configuration) in<br />

Building 3 then makes the connection to the SV<br />

network.<br />

Components: LON/IP router (master configuration),<br />

CentralNode, LPI10<br />

Ethernet<br />

*1 Naturally the Administration Building can have its own SV network at any time<br />

Building 3<br />

Connection with LON/IP router<br />

Required components:<br />

LON/IP router (slave configuration), LPI10,<br />

LockNode(s), digital component(s)<br />

Connecting External Buildings Via Twisted Pair, Modem & TCP/IP<br />

Bezeichnung Präsentation 4

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!