Manual 3060 System - SimonsVoss technologies

LON – Network 3065
Page 12
4.4 LockNode Inputs and Outputs
Terminals 3 to 8 are available for floating inputs or one output. The inputs transmit the
state of the door or lock contact, for example. However, you can also incorporate
external systems, such as motion detectors, photoelectric barriers, etc., into the
system and then also report their signals to the central computer. You can use the
output to pass on signals to external systems, such as heating, light, etc.
You can use the internal power
supply of the node to connect
switches or contacts without a
separate power supply and without
a ground connection.
External antenna
Connection of contacts which don’t have their
Follow the technical
specifications for the inputs or
the output when connecting
them.
Refer
to the data sheet for this
information.
Connection of contacts with own power supply
External antenna