Manual 3060 System - SimonsVoss technologies

Smart Output Module
Content
1.0 Important Information _________________________________4
2.0 Product Description___________________________________4
3.0 Before Ordering ______________________________________5
3.1 Smart Relay _____________________________________________ 5
3.2 Determine the Number of Modules that are Needed ____________ 5
3.3 Obtain and Dimension the Power Supply ____________________ 5
3.4 Determine the Installation Technique and the Installation Site ___ 5
3.5 Cable Types and Paths ___________________________________ 5
3.6 Outside Installation ______________________________________ 5
3.7 Guidelines ______________________________________________ 5
4.0 Before Installation ____________________________________6
5.0 Installation __________________________________________6
6.0 Connections _________________________________________7
6.1 Terminal Assignments ____________________________________ 7
6.2 Connection Assignments _________________________________ 8
7.0 Connection to the Smart Relay__________________________9
7.1 Standard Power Supply Connection________________________ 10
7.2 Emergency Release Connection for a Fire Alarm System ______ 10
7.3 Protective Circuit to Prevent an Opening when the
Supply Voltage Fails_____________________________________ 11
7.4 Protective Circuit for the Signaling Option Outputs ___________ 12
8.0 Programming and Configuration _______________________13
8.1 General Information _____________________________________ 13
8.2 Enter the Number of Modules _____________________________ 13
8.3 Select the Module Addresses _____________________________ 13
8.4 Adjust the Pulse Length__________________________________ 14
8.5 Select Signaling ________________________________________ 14
8.6 Automatic Name Assignment in the Software ________________ 14
8.7 Inverting the Outputs ____________________________________ 14