Manual 3060 System - SimonsVoss technologies

Manual – Digital Half Cylinder 3061
Page 17
6.1.1 Schema
Normal operation
8x double beeps
Residual capacity < 25%
Battery warning level 1:
Weak batteries
Programming device
Up to 15,000 operations or
9 months
Emergency battery -
Warehouse mode
Opening by system
administrator only
ca. 50 operations or 30
days
Battery warning level 2:
Extremely weak batteries
30 seconds of double
signal beeps
6.1.2 Procedure for emergency battery - warehouse mode
Please proceed as follows to change the batteries if the half cylinder is in emergency
battery - warehouse mode:
• Replacing batteries (see chapter Battery change).
• Go to the door and take a Notebook or PDA (having exported the locking
plan) and a programming device with you.
• Select the appropriate locking from the locking plan.
• Program over the cylinder once without making any changes. This deactivates
the two battery warning checkboxes and the warehouse mode.
• Use the authorised transponder to engage the cylinder.
The half cylinder will emit the level 2 battery warning once more after the batteries
have been changed. The locking cylinder's electronic system will then detect that the
batteries are at full capacity or have been replaced and the cylinder will work as normal.
This procedure is only necessary in emergency battery - warehouse mode. This
mode was introduced to prevent the batteries from completely discharging without intervention
by the locking system administrator. Nonetheless, batteries in emergency
battery - warehouse mode should be changed as soon as possible.